Half Quartz Infrared Heating Element ICH-402

Int. manager Anton Kozlovsky
Tel: +375 333 775 333
E-mail: info@infra-heater.com

Buy with one click REQUEST A QUOTE DOWNLOAD PRODUCT GUIDE

ICH-402 Half Quartz Infrared Heating Elements (HQE) is a cassette-style block of 7 half-length (104mm/~4inch) energy-efficient IR quartz emitters secured in a heat resistant stainless steel housing.

It is an instantly responding and a very efficient source of radiant heat. It can heat up in just 1-3 minutes and cool off in about 20 seconds. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off.

Quartz lamp tube has a Fe-Cr-Al alloy resistance coil wire inside, and an optional thermocouple TXA (Chromel-Alumel) with type "K" power leads.
ICH-402 quartz emitters (125 - 500w) produce infrared heating at the maximum allowed lamps temperature up to 780 °С, and surface radiation energy up to 6.0 W/cm.
The average operating lifespan is above 7,000 hours.
Supplied with standard 100 mm (4 inches) ceramic beaded power leads.

Electric Power	125w	200w	250w	325w	500w
Power density, W/cm²	1,6	2,6	3,2	4,1	6,4
Maximum surface temperature ⁽¹⁾, °С / °F	410/770	520/968	570/1058	630/1168	740/1364
Specific surface radiation energy ⁽¹⁾, W/cm²	1,05	1,91	2,43	3,21	5,06
Useful wavelength, µm	2,15-10,3	1,85-8,9	1,75-8,4	1,65-7,8	1,45-7,0
Maximum spectral radiation intensity wavelength, µm	4,2	3,7	3,4	3,2	2,9
Time needed to reach the operating temperature ⁽¹⁾, min	5	5	5	4	3
Emitter maximum temperature, °C / °F	780/1436
AC power supply (50 Hz), V	220/230
Operation mode	Long term, under supervision
Case, emitter dimensions (length x width, mm/inch)	124х60, 104х59 / 4.88x2.36, 4.09x2.32
Effective emitter surface, cm² / in²	78,4/1.21
Weight, g / oz	210/7.40
¹ - reached at ambient temperature from +18 to +25 °С

✔️ Examples of Applications

ICH-400 series infrared quartz heaters are used for industrial and commercial heating systems. An instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and program alternating power infrared soldering stations.

Thermoforming
Shrink packaging
Vulcanizing and curing rubber
Laminating
Curing
Sealing
Fusing processes
Space heaters
Drying processes (moisture, paint, coatings, textiles, photos, and sand core castings)

⚙️ Custom Options

Upon customer's request, EUROLINIA can produce custom Half Quartz Infrared Heating Elements with the following options:

Longer power leads.
Custom voltage supply: 110 - 380V.
Built-in (Type K Chromel-alumel) temperature control sensor: type TXA (K) thermocouple can be built into the emitter body to control the emitting surface temperature during heating.

☀️ After Service and Warranty

Guaranteed service life expectancy: at least five years.
Estimated life span at least 5,000 - 7,000 hours of non-stop operation.
The manufacturer guarantees the product's compliance with the requirements of the current regulatory documentation, subject to the conditions of transportation, storage, installation, and operation.
Warranty period: 12 months from the date of purchase.
During the warranty period, the consumer can have the faulty emitter replaced at the place of the purchase.
The warranty does not apply to the emitters having mechanical damage due to other signs of violation of transportation, storage, and operation rules.